office@sensodata.ro 0040730916242 /

  • Nu esti logat

    Intra in cont

    • Coșul este gol!

GA240 - SSI

Encoder absolut

Producător: Baumer Disponibilitate: Solicita stoc Cantitate disponibila: 0 buc.
Solicita produs
  • Encoder singleturn / SSI
  • Optical sensing method
  • Resolution: 14 bit
  • Clamping flange
  • Electronic setting of zero point
  • Available with additional incremental output

Technical data - electrical ratings

Voltage supply:
10...30 VDC
5 VDC ±10 % (on request)

Consumption w/o load:
≤50 mA (24 VDC)

Reverse polarity protection:
Yes (10..30 VDC) / No (5 VDC)

Initializing time typ.:
20 ms after power on

Interface:
SSI
Incremental A 90° B (optional)

Function:
Singleturn

Absolute accuracy:
±0,025 °

Sensing method:
Optical

Code:
Gray or binary

Interference immunity:
DIN EN 61000-6-2

Steps per revolution:
≤16384 / 14 bit

Emitted interference:
DIN EN 61000-6-4

Incremental output:
2048 pulses A90°B + inverted

Inputs:
SSI clock
Control signals UP/DOWN inv. and zero

Code sequence:
CW/CCW coded by connection

Diagnostic function:
Self-diagnosis

Output stages:
SSI data: Linedriver RS422
Diagnostic outputs push-pull
Incremental: push-pull or linedriver RS422

Approval:
UL approval / E63076

Technical data - mechanical design

Size (flange):
ø58 mm

Shaft type:
ø10 mm solid shaft

Flange:
Clamping flange

Protection DIN EN 60529:
IP 54 (without shaft seal)
IP 65 (with shaft seal)

Operating speed:
≤10000 rpm (mechanical)
≤6000 rpm (electric)

Starting torque:
≤0,015 Nm (+25 °C, IP 54)
≤0,03 Nm (+25 °C, IP 65)

Admitted shaft load:
≤20 N axial
≤40 N radial

Material:
Housing: aluminium
Flange: aluminium

Operating temperature:
-25...+85 °C
-40...+85 °C (optional)

Rotor moment of inertia:
14,5 gcm²

Relative humidity:
95 % non-condensing

Resistance:
DIN EN 60068-2-6 Vibration ±0.75 mm - 10-58 Hz 10 g - 58-2000 Hz
DIN EN 60068-2-27 Shock 200 g, 6 ms

Weight approx.:
250 g

Connection:
Connector M23, 12-pin
Connector M12, 8-pin
Cable 1 m

Data sheet

GA240 - SSI - FR Descarca
GA240 - SSI - EN Descarca
GA240 - SSI - DE Descarca

Installation and operating instructions

GA240, GA241 - SSI - DE/EN Descarca

Certificates / approvals

UL certificate E63076 - EN Descarca

3D CAD

GA240 - solid shaft ø10 mm, cable, radial - STEP Descarca
GA240 - solid shaft ø10 mm, connector M23, 12-pin, radial - STEP Descarca
GA240 - solid shaft ø10 mm, connector M23, 12-pin, axial - STEP Descarca

Declaration of conformity

GA240, GA241, G0A2H, GBA2x, GXA2S - DE/EN/FR Descarca
Acorda o nota:

Parteneri

Consultanta gratuita
Transport unic
Achizitie prin sicap
Tehnologii pentru industrie
Politica magazinului privind modulele cookie
Confidentialitate Termeni si conditii